边摸边吃奶边做激情叫床视频

  • 網站出租熱線:13933742050
    地址:********
    郵編:*****
    電話:13933742050
    傳真:
    郵箱:*********@qq.com
    網址:www.fanghuotiao.com

    新聞中心 您現在的位置是:首頁 > 新聞中心
    2020新品制香機怎樣去合理的檢查制香機
    發布時間:2020-03-12 16:05:48 發布人:admin 點擊:351

     制香機選用的是液壓驅動,油缸直徑41CM,料桶高100CM,也可以根據用戶的要求標準進行專門規劃定制。把出產所需的資料通過篩粉機挑選,根除粗料雜物后,放入攪拌機中,通過攪拌好的料經加壓從模具的孔中擠出,就是完好的制香主進程.試機發動前要嚴厲檢查機器各部位設備是否符合要求,對每個部位的螺絲進行檢查防止全自動制香機在工作進程中螺絲松動形成部件損壞。

      制止鄰近置放易燃、易爆物品,避免發作事端請在全自動制香機開機前對運動部位進行加油,目的使全自動制香機在運動中得到很好的光滑,然后延長了全自動制香機的運用壽數。
      在運用全自動制香機之前必需要進行一次壓力測驗,實驗壓力是否正常,各部件的工作是否到位,此外還要檢查液壓油,守時更換,保持用油清潔。進行安全閥壓力和滑閥自動跳位壓力的調整,以防調值有誤,影響正常運用或系統超載。假設呈現系統突然無壓力的現象,那么可以拆開回油閥進行詳細的檢查已經清洗,原樣設備回去之后檢查有無卡滯現象。假設發作分配器零部件接合處漏油、滲油的現象,可以更換密封圈、墊片、擰緊螺釘、螺母。檢查回油閥是否在翻
    The incense making machine is hydraulically driven, with cylinder diameter of 41cm and barrel height of 100cm. It can also be customized according to the user's requirements. The data needed for production shall be selected by the powder screening machine, after the impurities of the coarse materials are eliminated, they shall be put into the mixer, and the mixed materials shall be extruded from the holes of the mold by pressurization, which is the complete main process of making fragrance. Before starting the test machine, it is required to check whether the equipment at all parts of the machine meets the requirements, Check the screws of each part to prevent the screws from loosening and parts damage during the working process of the automatic fragrance making machine.
     
    Prevent the adjacent place of inflammable and explosive materials, and avoid accidents. Please refuel the moving parts before the fully automatic incense making machine is started, so as to make the fully automatic incense making machine smooth during the movement, and then extend the service life of the fully automatic incense making machine.
     
    A pressure test must be carried out before using the full-automatic fragrance making machine to check whether the test pressure is normal and whether the work of each component is in place. In addition, check the hydraulic oil, replace it on time and keep the oil clean. Adjust the pressure of the safety valve and the automatic tripping pressure of the slide valve to prevent the adjustment value from being wrong, affecting normal operation or overloading of the system. Assuming that there is no pressure in the system suddenly, the oil return valve can be disassembled for detailed inspection and cleaning, and the original equipment can be checked for jamming after returning. If the joint of distributor parts leaks oil or oil, the sealing ring, gasket, screw and nut can be replaced. Check whether the oil return valve is turning over